Tank sealing<\/a> with the instructions and avant garde<\/strong><\/a> its materials Macon<\/strong> will lead you to ultimate success.<\/p>\n Prefer Kristoflex, a flexible two-component cementitious product with a long service life in the field of tank sealing. Pool waterproofing<\/a> and paint with epoxy paint<\/strong><\/p>\n Related Materials: A common and economical way of forming the final surface of one swimming pool<\/strong><\/a> is to paint it with a special color (e.g. epoxy paint). This is a technically adequate solution, which is clearly more economical than ceramic coating tiles.<\/strong><\/a> The color to be used should have:<\/p>\n A primary requirement is that the pool carrier must be properly calculated so that it is statically sufficient to Hydrostatic pressure<\/strong> of the pool water when it is full and of the water table when it is empty. The impermeability of the cement mortar is achieved by adding the \u0391DINOL-DM mortar mass sealant, at a rate of 1% based on the weight of the cement. The requirements of elasticity and resistance to water, chemicals and weather effects, which must be satisfied by pool paint<\/strong><\/a>, successfully covers the application of epoxy paint EPOXYCOAT-S<\/strong><\/a>. It is a 2-component epoxy paint, which shows increased elasticity and resistance to abrasion, weather effects and crowd chemicals<\/strong><\/a>, such as dilute acids, alkalis<\/strong><\/a>, petroleum, some solvents, water, seawater<\/strong><\/a> etc.<\/p>\n Substrate preparation<\/p>\n Priming and painting with epoxy paint<\/strong> EPOXYCOAT-S<\/a><\/p>\n \u039c\u03cc\u03bd\u03c9\u03c3\u03b7 \u03b4\u03b5\u03be\u03b1\u03bc\u03b5\u03bd\u03ae\u03c2 \u03bd\u03b5\u03c1\u03bf\u03cd – \u03a0\u03b9\u03c3\u03af\u03bd\u03b1\u03c2 – Macon \u03a3\u03c4\u03b5\u03b3\u03ac\u03bd\u03c9\u03c3\u03b7 \u03b4\u03b5\u03be\u03b1\u03bc\u03b5\u03bd\u03ce\u03bd \u03bc\u03b5 \u03c4\u03b9\u03c2 \u03bf\u03b4\u03b7\u03b3\u03af\u03b5\u03c2 \u03ba\u03b1\u03b9 \u03c4\u03b1 avant garde \u03c5\u03bb\u03b9\u03ba\u03ac \u03c4\u03b7\u03c2 Macon \u03b8\u03b1 \u03c3\u03b1\u03c2 \u03bf\u03b4\u03b7\u03b3\u03ae\u03c3\u03b5\u03b9 \u03c3\u03b5 \u03b1\u03c0\u03cc\u03bb\u03c5\u03c4\u03b7 \u03b5\u03c0\u03b9\u03c4\u03c5\u03c7\u03af\u03b1. \u03a4\u03b9 \u03c7\u03c1\u03b5\u03b9\u03ac\u03b6\u03b5\u03c4\u03b1\u03b9 \u03c3\u03b5 \u03bc\u03b9\u03b1 \u03b4\u03b5\u03be\u03b1\u03bc\u03b5\u03bd\u03ae \u03bd\u03b5\u03c1\u03bf\u03cd \u03b3\u03b9\u03b1 \u03c3\u03c9\u03c3\u03c4\u03ae \u03c3\u03c4\u03b5\u03b3\u03ac\u03bd\u03c9\u03c3\u03b7; \u03a7\u03c1\u03b5\u03b9\u03ac\u03b6\u03b5\u03c4\u03b1\u03b9 \u03ad\u03bd\u03b1 \u03bc\u03c0\u03b5\u03c4\u03cc\u03bd \u03bc\u03b5 \u03ba\u03bb\u03b5\u03b9\u03c3\u03c4\u03cc \u03ba\u03b1\u03b9 \u03c7\u03b1\u03bc\u03b7\u03bb\u03cc \u03c0\u03bf\u03c1\u03ce\u03b4\u03b5\u03c2! \u03a7\u03c1\u03b7\u03c3\u03b9\u03bc\u03bf\u03c0\u03bf\u03b9\u03ae\u03c3\u03c4\u03b5, \u03bb\u03bf\u03b9\u03c0\u03cc\u03bd, \u03ad\u03bd\u03b1 \u03ba\u03b1\u03bb\u03cc \u03c3\u03c4\u03b5\u03b3\u03b1\u03bd\u03c9\u03c4\u03b9\u03ba\u03cc \u03bc\u03ac\u03b6\u03b7\u03c2, \u03b3\u03b9\u03b1 \u03bd\u03b1 \u03bc\u03c0\u03bb\u03bf\u03ba\u03ac\u03c1\u03b5\u03c4\u03b5 \u03c4\u03bf\u03c5\u03c2 \u03c0\u03cc\u03c1\u03bf\u03c5\u03c2 \u03ba\u03b1\u03b9 \u03ad\u03bd\u03b1\u03bd […]<\/p>\n","protected":false},"author":4,"featured_media":7239,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"rs_blank_template":"","rs_page_bg_color":"","slide_template_v7":"","footnotes":""},"categories":[212],"tags":[],"class_list":["post-7238","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-texnikes-efarmoges-article"],"yoast_head":"\n\n
\nA concrete with closed and low porosity is needed! Use<\/a>, so a good mass sealer, to block the pores and a superfluidizer, to reduce the porosity, since it will allow the mixing water to be reduced.water tank insulation \u2013 Macon<\/li>\n
\nAvoid single-component rigid cementitious and if you want to do the perfect job, arm Kristoflex with Vertex R51 or Vertex R52 glass mesh.water tank insulation \u2013 Macon<\/p>\nWater Tank Insulation \u2013 Macon<\/h2>\n
\nEPOXYCOAT-S 2-component epoxy paint suitable for swimming pool paint<\/strong><\/a>
\nDUROFLOOR-BI 2-component transparent epoxy impregnation
\nADINOL-DM Sealing mass of mortars and unreinforced concrete
\nADIPLAST Building resin for multiple improvements of mortars
\nPLASTIPROOF Type A concrete fluidizer \u2013 Mass sealant
\nEPOMAX-EK 2-component epoxy paste
\nSM-14 Special solvent for epoxy paints<\/p>\nI. NATURE OF THE PROBLEM-REQUIREMENTS<\/strong><\/h3>\n
\nThe choice of using the epoxy paint significantly affects the way waterproofing<\/strong><\/a> her swimming pool<\/strong><\/a>, because it sets specific requirements for the waterproofing<\/strong><\/a> which will be implemented.
\nMore specifically, waterproofing<\/strong><\/a> layer should have:<\/p>\n\n
\n
II. SOLUTION<\/strong><\/h3>\n
\nThe waterproofing of the pool is achieved adequately, by applying a strong and waterproof cement mortar to the walls and floor of the pool, which acts as a waterproofing but at the same time as a smoothing layer. In this way, the necessary smooth, stable and waterproof substrate is created for the application of the epoxy paint.<\/p>\n
\nIts adhesion to its walls swimming pool<\/strong><\/a> is ensured by applying a layer of cast reinforced with ADIPLAST building resin and on the pool floor by applying an adhesive layer reinforced with ADIPLAST<\/strong><\/a>.
\nIt is additionally recommended, during the concreting of the structural elements of the swimming pool, to add to the concrete the liquidizer-sealant mass PLASTIPROOF, in a ratio of 0.2-0.5% by the weight of the cement.<\/p>\nIII. APPLICATION<\/strong><\/h3>\n
\n
\nOn the vertical surfaces, the adhesion of the cement mortar is strengthened by applying a layer of "throw" reinforced with the construction resin ADIPLAST (cement : sand : ADIPLAST<\/strong><\/a> : water = 1 : 1 : 0.25 : 0.25 by volume).
\nAt the bottom of it swimming pool<\/strong><\/a>, its adhesion is strengthened cement mortar<\/strong><\/a> by applying an adhesive layer reinforced with ADIPLAST building resin (cement : sand : ADIPLAST : water = 1 : 1 : 0.5 : 0.5 by volume).
\nApplication of the mud with the help of guides in a thickness of 2-3 cm.
\nADINOL-DM consumption: about 4.2 kg\/m3 cement mortar.<\/li>\n
\nApplication of the ground cement mortar to a thickness of 5-10 mm.
\nADINOL-DM consumption: about 5 kg\/m3 cement mortar.<\/li>\n\n
\nComponents A (resin) and B (hardener) of DUROFLOOR-BI are packaged in containers with a predetermined mixing ratio. Component B is added completely into component A. The two components are mixed for approximately 5 minutes with a low speed drill (300 rpm). It is important to stir both the walls and the bottom of the container in order to distribute the hardener evenly.
\nDUROFLOOR-BI consumption: approximately 150 g\/m2, depending on the absorbency of the substrate.
\nAlternatively, priming can be done with EPOXYCOAT-S<\/strong><\/a> diluted with the special solvent SM-14, at a rate of 10-20% by weight.<\/li>\n
\nComponents A (resin) and B (hardener) of EPOXYCOAT-S are packaged in containers with a predetermined mixing ratio. Component B is added completely into component A. The two components are mixed for approximately 5 minutes with a low speed drill (300 rpm). It is important to stir both the walls and the bottom of the container in order to distribute the hardener evenly.
\nEPOXYCOAT-S is used as is or diluted up to 5% wt. with the special solvent SM-14. The material is applied by roller, brush or spray in at least two layers. The second layer follows after the first has dried, but within 24 hours of applying the first.
\nEPOXYCOAT-S consumption: 200-300 g\/m2\/layer.<\/li>\n<\/ol>\nIV. NOTES water tank insulation \u2013 Macon<\/strong><\/h4>\n
\n