The right choice of swimming tank

The main motivation in building one swimming pool it is her integration into the landscape as she ceases to be simply one tank and transforms into an expanse covered with water in the heart of nature. The right choice of swimming tank

Naturally, all the swimming pools they cannot be adapted to all homes so the first thing to consider is the style of the home in order to make the right choice. The shape, as well as the size of a swimming pool is influenced by a multitude of factors.

First, the area where the pool will be built plays a very important role. If the area is large, you can build it pool your far enough away from home to be considered an independent and separate property. Conversely, in a small space do not provide one pool with the largest possible surface as this would constitute a mistake to the detriment of the regional arrangements. Then, given that the allure of the purity and clarity of the water brings together fans of all ages and types, from the youngest to the oldest and from sunbed enthusiasts to sports enthusiasts, a key criterion is the identification of needs of the people who will use it pool. To be more specific, as the duration of her life swimming pool it is great, the people who will use it in the future pool are a factor in its construction.

By thinking this, the type of people who will use it will also determine its depth and shape. Last, but not least, we leave the budget required. Our advice at this point is to prefer a smaller size pool with better quality coating material and mechanical equipment because we must not forget that the clear water it is nothing more than an artificial environment that is maintained thanks to regularity and strictness maintenance.

The first stage is once we make the decision to build one swimming pool is the study of the project, which is done taking into account the factors we mentioned above. Based on this study we proceed to the construction stages, starting with the excavation of the pre-selected site for the construction of swimming pool. With its completion, it is the turn of the workshop that has undertaken the creation of its frame swimming pool with reinforced concrete.

The right choice of swimming tank

Based on the demand for as natural a look as possible swimming pool, the recommended material for its construction always remains reinforced concrete. Directly connected to high-quality architectural achievements, he developed creation swimming pools which give the impression of a natural landscape since their construction is based on their integration with the surrounding area. The technique used for construction swimming pools is the cast reinforced concrete with which its shell is created swimming pool. It should be noted that this technique requires perfect knowledge of the material and the intervention of one professional.

First, pour C12/15 type concrete over the entire surface of the excavation. The next day we carve out its shape swimming pool. Upon completion of its engraving swimming pool its molding begins, where with the use of wood we form the shell of the tank and then place the iron reinforcement based on a static study by a Civil Engineer. Then the network for the electromechanical equipment of the pool is placed.

With the completion of the placement of the above, the molds are closed in order to proceed to the next stage, i.e. the casting of the concrete type C20/25. This casting is carried out using a pump (press) and at the same time with the help of a concrete vibrator, which helps to avoid the creation of voids inside the concrete. The next stage is the waterproofing of the pool during which the pool it is sealed first externally and then internally with spreadable two-component cements (deitterman cerinol DS) of German origin which permanently seal and prevent any chemical interference.

In detail, the work carried out is, in principle, the cleaning of the concrete surfaces from loose parts, the cutting of protruding irons (hairpins) and wood (morela) at a depth of 2-3 cm in the concrete and sealing with Sikadur 32 resin and then washing the of surfaces with pressurized water to saturation with 300psi water jet. Cellulose holes, nests and cracks (greater than 0.5 mm wide) as well as any other imperfections in construction joints are then sealed with premixed cementitious mortar and finally spread in two layers with spreadable cementitious.

The right choice of swimming tank

After finishing the waterproofing work, we fill it swimming pool with water in order to receive its final loads and to confirm that no damage has occurred to the concrete. Cracking is the most common problem when using beto. Its main cause is the shrinkage that the concrete exhibits during melting. If this has happened, it will show once the pool is filled with water as then we will discover a potential leak. Once it is confirmed that there is no problem in the construction so far, we empty the pool and do the coating cement mortars (whose thickness is around 2-3 cm) at its bottom swimming pool for its smoothing as well as wherever else required, such as for example on its walls.

In cement mortar, in addition to aggregates such as concrete sand and cement, propylene fibers and garbilli are also used to reinforce it. The workshop that did the installation of the network of electromechanical equipment can now continue with the second phase of these installations, installing the built-ins and constructing the engine room. It is now the turn of the lips. The skirting boards are divided into two categories: marble and special pieces - tiles. After we have chosen which type to use, their placement is done around the crown of the pool, that is, in the part that is formed around the perimeter of the tank with a thickness twice that of the walls thus adding extra support to increase the structural integrity of the shell of the pool swimming pool. With the end of these works, we reach the last stage, which concerns its internal coating swimming pool. The options for interior finishes are varied.

First, there is the paint which is either polyurethane or epoxy. Its lifespan is not long enough compared to other types of finish, since it has to be re-passed every 4-5 years, but it is often used as it gives a sparkling effect to the pools and there is a multitude of colors. The tile is considered durable and with a long life, provided that it has been installed correctly. Very accurate look at pool can be caused by the choice of glass mosaic. A natural look is provided with the different types of plaster. Consisting of sea sand and ocean gravel combined with high-strength white cement is Mother of Pearls, with the application of which we achieve a pebbly coating of the pool.

Stamina

Stone mixtures of mineral colored cement, colored quartz as well as natural colorful round grains of sand are the Maui Gem which ensures the smooth texture and diverse appearance below the surface of the water. Long lasting resistance to chlorine, acids and UV radiation characterizes the coating with Fresco colors i.e. the colored plaster. Also a cementitious material that belongs to the plaster category is AquaCrete, of Spanish origin, which strengthens the stabilization of the swimming pool substrate and there is a wide availability of colors for each option with its main feature, its ease of application. Finally, finishing material is also considered Acrotynk, of German origin, which consists of artificial epoxy sand.

Upon completion of the application of our preferred coating material, the swimming pool it is filled with water and we start the electromechanical equipment. The pool is now ready for use. With the appropriate exchange of accessories and equipment in the surrounding area, offer a new reception area in your residence, as the pool you is the realization of your dream by standing out in the garden thanks to its elegance.